|
Overview | FDA | FDU
SecuGen's FDA sensor is a complete, stand-alone fingerprint recognition system that contains an optic module for capturing fingerprints, connected to a PC board with CPU that extracts and stores minutiae data from fingerprints as templates, matches templates for user authentication, and communicates with external devices.
FDA sensors can function entirely without an external PC, making them highly integratible with access control units or door locks. But FDA sensors can also function in connection to a PC or a network and interoperate with data input from SecuGen USB fingerprint readers for large-scale implementations.
|
FDA Sensors
|
|
Product
|
FDA02DL
|
FDA02
|
| Components |
Optic Module, PC Board, Cable
|
| Optic Module |
|
Standard
|
| PC Board |
Compact size
|
Standard size
|
|
with
|
CPU, embedded algorithms, SRAM, Flash Memory
|
| Cable |
C9 (6-6 pin, 6 wire)
|
C1 (9-9 pin, 9 wire)
|
| Firmware Version |
v1.x, v2.x, v3.x
|
v1.x, v2.x, ANSI378
|
| v1.x |
Fast 1:1 Matching, 4,400-User Storage Capacity
|
| v2.x |
Fast 1:1 and 1:MANY Matching, 1,000-User Storage Capacity
|
| v3.x |
|
Not available
|
| ANSI378 |
Not available
|
|
|
Read Press Release About
|
|
|
|
Technical Specifications
|
| Physical |
FDA02DL
|
FDA02
|
| Optic Module |
21 x 32 x 62 mm, 35 g
|
21 x 32 x 62 mm, 33g
|
| Board |
59 x 43 x 8 mm
|
93 x 43 x 8 mm
|
| Operating Temp. |
- 20 to 65 °C
|
| Storage Temp. |
- 40 to 85 °C
|
| Humidity |
< 90% RH, non-condensing
|
| Optical |
FDA02DL
|
FDA02
|
| Optic Module |
OPP03XC2
|
OPP03AC2
|
| Image Resolution |
500 + 1 dpi (0.2%)
|
| Image Size |
260 x 300 pixels
|
| Image Gray Scale |
256 shades (8-bit gray level)
|
| Non-Linear Distortion |
< 0.1%
|
| Effective Sensing Area |
12.9 x 15.2 mm
|
| Platen Hardness |
750 Hk (~6.8 Mohs)
|
| Light Source |
Red LED
|
| Typical Lifetime |
60,000 hours
|
| Ambient Light Tolerance (max) |
|
| Electrical |
FDA02DL
|
FDA02
|
| Operating Voltage |
3.6 ~ 5.5 V
|
4.75 ~ 5.25 V
|
| Power (max) |
1.0 W
|
| Current (standby / operating / max) |
< 1 / 160 / 200 mA
|
160 / 160 / 200 mA
|
| ESD Tolerance |
> + 15 kV
|
| Response Times * |
FDA02DL
|
FDA02
|
| Fingerprint Capture |
0.4 sec
Single Frame Capture includes time for Auto-On Detection, Latent Fingerprint Check, and Smart Capture
|
| Feature Extraction |
0.8 ~ 1.2 sec
|
| 1:1 Matching |
0.2 sec
|
1:N Matching
(avg) |
0.9 sec for 200 users (v1.x)
|
|
0.5 sec for 200 users, 0.8 sec for 1,000 users (v2.x and ANSI378)
|
|
0.5 sec (v3.x for 100 users)
|
1:N Matching
(max) |
8.0 sec (v1.x), 1.4 sec (v2.x, 3.x, ANSI378)
Maximum time is calculated when no matching template has been registered and the database is full
|
* Total Response Time = (Fingerprint Capture Time) + (Feature Extraction Time) + (1:1 or 1:N Matching Time)
|
| Other |
FDA02DL
|
FDA02
|
| CPU |
Hyperstone E1-32XSR 128 MHz
|
Hyperstone E1-32XS 96 MHz
|
| RAM |
1 MB SRAM (512 KB x2)
|
| ROM |
4 MB Flash
|
| Interface |
RS 232 (TTL Level)
8 Bit MCU-Friendly Bus Interface / Sensor Interface
|
RS 232
External I/O Ports: UART Port 1 Channel / Sensor Interface
|
| Communication Speed (max) |
1 Mbps (Bus Interface) 57kbps (Serial)
|
115 kbps
|
| Supported Fingerprint Templates & Size |
SecuGen proprietary format
(256 or 400 bytes)
|
SecuGen proprietary format
(256 or 400 bytes) or
ANSI-INCITS 378-2004 format (variable)
|
| User Storage Capacity |
4,400 (1:1 Matching) or 200 (1:N Matching) (v1.x)
1,000 (v2.x)
|
|
100 (v3.x)
|
1,000 (ANSI378)
|
| Auto-On™ |
Yes
|
No
|
| Dynamic Adaptive Enrollment™ |
Yes (v3.x only)
|
No
|
| RoHS Compliance |
Yes
|
|
FDA Sensor Developer Kits
|
|
Product
|
FDA02DL
Developer Kit
|
FDA02
Developer Kit
|
| Components |
FDA02DL (1 unit), Test platform, 5V AC-DC Power Adapter, Connectors to Host Controller and PC (USB) and Developer Kit CD |
FDA02 (1 unit), 5V AC-DC Power Adapter, Connectors to Host Controller and PC (DB9 serial) and Developer Kit CD |
| Developer Kit CD Contents |
- Windows based tool kit and programs
- Protocol info & header files
- Host controller sample source code and schematic
- Main controller emulator demo (FDA02 Plus, FDA02 only)
- Flash-memory upgrade utility program (FDA02 Plus, FDA02 only)
- Database editor & log-file viewer (FDA02 Plus, FDA02 only)
- Developer guides and documentation |
| Maintenance
|
First year included: - Tech support - Free software upgrades - Access to SGDN (SecuGen Developer Network) |
FDA Developer Kits (sold separately) contain APIs and data conversion modules to help expand the capabilities of your fingerprint biometric system. These kits include all the hardware, software, support and documentation needed to accelerate the design of stand-alone or networked devices integrated with SecuGen's durable and high-performance fingerprint sensors and algorithms. With FDA sensors, you can do the following functions and more:
- Register user profiles
- Update and delete user profiles
- Verify or identify user
- Manage user database
- Adjust system settings (brightness, exposure, gain, security levels, quality threshold, etc.)
- Test all functions
- Interface with PC and SecuGen USB fingerprint readers
Copyright © SecuGen Corporation. All rights reserved. Feedback. Search this site.
|
